4000 RPM Electric Lab Centrifuge, 2770xg 6 Tubes x 50ml Stainless Steel Desktop Centrifuge Machine, Lab Benchtop Centrifuges for Scientific Research, Colleges Universities, Agriculture

SpecificationMount Type: DesktopAssembly Required: No Material: Acrylic, Stainless Steel, Cold Rolled Steel, Plastic, RubberProcess: Plastic SprayingColor: Blue, WhiteShape: RectangularStyle: ModernVoltage: 110V 60HzPower Source: Corded ElectricityPlug Type: US StandardRated Power: 60WSpeed: 0-4000r/minMaximum Relative Centrifugal Force: 2770xgRotor Capacity: 6*50ml/0.05 Qt.Timing: 0-60 Min or Always OnProduct Size: 28*29*25.5cm/11.02*11.41*10.03inPackage Size: 37*34*33cm/14.57*13.39*12.99inGross Weight: 9.2kg/20.28lbsNet Weight: 8.6kg/18.96lbsPackage Included1* Desktop Electric Centrifuge1* English ManualNotes 1. Please check the style and size before purchasing.2. Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included. The centrifuge machine is a whole product, and should often pay attention to its maintenance.3. Please note that the desktop electric centrifuge adopts a three-eye safety socket, it should be properly grounded before use, the machine should be placed on a smooth, flat, and solid surface, and the working room should be neat and clean, dry, and well-ventilated. Check the timer knob before starting the machine, it should be in the “0” position, then turn on the power, turn on the power switch, and the indicator light is on. If you find the power indicator light is not on, you should immediately stop the machine to check.4. Please note that it is strictly prohibited to operate under no-load without installing the rotor. Before running, the rotor should be checked for corrosion damage. When the rotor running do not open the centrifuge cover, and do not touch the running head. Please insert the tubes symmetrically into the machine, and strictly prohibit the rotor head from running with unbalanced loading.5. Please note that if you have a single sample, please add a tube of water to realize a control experiment. Plastic tube weight deviation should be less than 0.2 grams, generally after the tube is damaged, it should be replaced by a group of simultaneous inversion or symmetrical two together in order to reduce the deviation phenomenon.6. In operation, the length and weight of the symmetrical two glass tubes (including the experimental liquid) should be equal, if the deviation is large, it will produce shaking. The disc should avoid encountering strong acids, caustics, and corrosion.7. Please note that although there is a slight vibration at speeds less than 500 rpm, it becomes smooth at speeds greater than 1,000 rpm. Quiet when the load is balanced, please set the timer first and then turn on the speed controller.8. Please note that when operating a desktop electric centrifuge series excitation-type motor, the brushes are usually around 500 hours and should be reversed in time so that the brush commutator does not wear out and then grind.9. Please note that the factory noise standard for desktop electric centrifuges is less than 70 dB (measured separately 3.28 feet away from each group of centrifuges).10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.ApplicationIt is widely used in scientific research, colleges and universities, agricultural science and technology, petrochemicals, biochemicals, health and epidemic prevention, life sciences, biological products, pharmaceutical research, and other enterprises and institutions laboratories for qualitative analysis of plasma, platelets, serum, urea, etc. and centrifugal sedimentation and separation of other suspensions liquids, particles of different densities.How to Operate1. Carefully open the top cover and place the centrifuge tube. Note: The weight of the samples placed symmetrically inside the centrifuge protection tube must be the same, and the weight deviation must not exceed 0.002 lbs.2. Open the lid and set the rotational speed to the lowest position.3. Switch on the power supply and turn the timer to the desired time value, after which the timer will start turning from the ‘0’ position and the turntable will gradually turn from low to high speed to the speed required for centrifuge operation.4. After working for a certain period, the timer returns to the “0” position, the turntable stops rotating, the centrifuge stops working, and the speed is adjusted to the lowest position.5. After the desktop electric centrifuge is used, turn off the switch, place the machine in a dry, ventilated place, and keep it clean.

• Strong Durability: The acrylic cover plate, stainless steel hinges, cold rolled steel plastic spraying body, and plastic rotor give the electric lab centrifuge good durability, which ensures centrifuge machine a longer and more stable service life.
• Enhanced Separation Efficiency: Powered by a 60W high-grade carbon brush motor, electric lab centrifuge generates a powerful relative centrifugal force of 2770×g, enabling rapid and precise separation of solid particles or liquid components of varying densities.
• Precise Speed Control: The centrifuge machine supports continuous speed adjustment from 0 to 4000 r/min, allowing you to fine-tune the centrifugal force to match specific experimental requirements.
• Smart Timer & Integrated Safety Protection: The lab benchtop centrifuge running time (0–60 min or continuous work) can be preset, and the product will automatically stop upon completion—enhancing workflow efficiency and reproducibility. Equipped with a built-in fuse to safeguard against overload and short circuits, centrifugal processing machine provides reliable use and user confidence.
• Easy to Operate & Compact Design: Equipped with an intuitive operation interface and sensitive adjustment knobs, portable centrifuge is easy for you to get started even if you are a first-time user. The vertical centrifuge compact size (11.02*11.41*10.03 inches) doesn't take up too much space and is suitable for use in limited space in the lab.