TEN-HIGH 100W Power Supply for 80~130W CO2 Laser Tubes CO2 Engraving Cutting Machine, 110V, 220V Optional

Features: 1. Strong adaptability: 110V, 220V are optional, adapting to various models at home and abroad. 2. Good compatibility: It can adapt to many manufacturers' laser tubes. 3. The laser device is more secure: it has an open-circuit protection function and significantly prolongs the life of the power supply. 4. Laser power control is simple: high or low level signal control can be selected. 5. Quick response speed and effect, high performance,large cutting power,it also can prolong laser tube service life. . 6. The power supply itself has a manual light test function, which is more convenient for maintenance. 7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc. Operation Instruction: 1. Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminal of Power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly. 2. Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signal shall be reliably connected to control terminal of the power supply , after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. 3. Voltage of power input: Power input of the power supply shall be 110VAC/50Hz. If 220VAC required please specify when placing order. Package List: 110V Co2 Laser Power Supply x1pcs

• Maximum Input Power 800W, Maximum Input Current 10A
• Maximum output voltage DC 40KV, maximum output current DC 38mA
• Operating temperature -10~40°C, relative humidity ≤90%
• Cooling form: Forced air cooling
• Dimensions: 328*193*97mm (L*W*H)